  * Data for Dt, Duration, and Period *
     0.1     128 : Delta Time (sec), and Number of Time (must be Power of 2)
     0.2     0.0 : Minimum Period (sec), and Imaginary Omega for Phinney
  * MEDIUM DATA *
         1           : NL (NUMBER OF LAYERS)     t/m3,m/s,   ,m/s,   ,   m
     2.5  5500.0   200.0  3000.0   100.0     0.0 :DNS, Vp, Qp, Vs, Qs, Thick
  * FAULT DATA *
     100.0     100.0 : Total Length (STR) and Width (DIP) (m),
    1    1    1 : Num. of Sub-Faults (NSTR,NDIP),Gauss Points per Wavelength
       0.0    1 : Time Delay(sec), Source Type(=0:Ramp; =1:Smoothed; =2:exp)
       0.0       0.0   11000.0 : Location of Hypocenter (X, Y and Z: m)
       0.0       0.0   11000.0 : Location of Fault Origin (X, Y and Z: m)
       0.0      90.0 : Strike, and Dip (deg)
    3000.0 : Rupture Velocity (m/s)
       1     0.0 : Number of Time Windows and Time Interval (sec)
     0.2     0.2 : Half-Rise time 1 & 2 for 1st Time Window (sec)
 * dislocations (m) on sub-faults for 6 time windows
 1000.0
   * rake angles (degree) on sub-faults for 6 time windows
  0.0
 * WAVENUMBER INTEGRATION DATA FOR SIMPSON'S OR FILON'S FORMULAS *
       400 : Number of Integration Points from 0 to om/Ryleigh(min)
        50 : Number of Integration Points from om/Ryl(min) to om/c(final)
      10.0 : Factor for c(final): c(final)=Ryl(min)/Factor (Use 10, usually)
 * DATA FOR THE ASYMPTOTIC SOLUTIONS *
         1 : BE USED (=1), OR NOT USED (=0)
 * CHANGE OF SIGNS OF IMAGINARY PARTS OF FINAL RESULTS (FOR FFT) *
         1 : CHANGE SIGN (=1), NOT CHANGE SIGN (=0)
 * OBSERVATION POINT DATA *
         1 : NUMBER OF OP
    1000.0    2000.0   10000.0 : (x,y,z: m)





  * Data for Dt, Duration, and Period *
     0.1     128 : Delta Time (sec), and Number of Time (must be Power of 2)
     0.2     0.0 : Minimum Period (sec), and Imaginary Omega for Phinney
  * MEDIUM DATA *
         3           : NL (NUMBER OF LAYERS)     t/m3,m/s,   ,m/s,   ,   m
     2.2  3000.0   100.0  2000.0    50.0  2000.0 :DNS, Vp, Qp, Vs, Qs, Thick
     2.5  5500.0   200.0  3000.0   100.0  5000.0 :DNS, Vp, Qp, Vs, Qs, Thick
     2.7  6000.0   500.0  3500.0   150.0     0.0 :DNS, Vp, Qp, Vs, Qs, Thick
  * FAULT DATA *
     100.0     100.0 : Total Length (STR) and Width (DIP) (m),
    1    1    1 : Num. of Sub-Faults (NSTR,NDIP),Gauss Points per Wavelength
       0.0    1 : Time Delay(sec), Source Type(=0:Ramp; =1:Smoothed; =2:exp)
       0.0       0.0    2100.0 : Location of Hypocenter (X, Y and Z: m)
       0.0       0.0    2100.0 : Location of Fault Origin (X, Y and Z: m)
       0.0      90.0 : Strike, and Dip (deg)
    3000.0 : Rupture Velocity (m/s)
       1     0.0 : Number of Time Windows and Time Interval (sec)
     0.2     0.2 : Half-Rise time 1 & 2 for 1st Time Window (sec)
 * dislocations (m) on sub-faults for 6 time windows
 1000.0
   * rake angles (degree) on sub-faults for 6 time windows
  0.0
 * WAVENUMBER INTEGRATION DATA FOR SIMPSON'S OR FILON'S FORMULAS *
       400 : Number of Integration Points from 0 to om/Ryleigh(min)
        50 : Number of Integration Points from om/Ryl(min) to om/c(final)
      10.0 : Factor for c(final): c(final)=Ryl(min)/Factor (Use 10, usually)
 * DATA FOR THE ASYMPTOTIC SOLUTIONS *
         1 : BE USED (=1), OR NOT USED (=0)
 * CHANGE OF SIGNS OF IMAGINARY PARTS OF FINAL RESULTS (FOR FFT) *
         1 : CHANGE SIGN (=1), NOT CHANGE SIGN (=0)
 * OBSERVATION POINT DATA *
         1 : NUMBER OF OP
    8054.6    5556.5    2050.0 : x,y,z



  * Data for Dt, Duration, and Period *
     0.1     128 : Delta Time (sec), and Number of Time (must be Power of 2)
     0.2     0.0 : Minimum Period (sec), and Imaginary Omega for Phinney
  * MEDIUM DATA *
         2           : NL (NUMBER OF LAYERS)     t/m3,m/s,   ,m/s,   ,   m
     2.2  3000.0   100.0  2000.0    50.0  5000.0 :DNS, Vp, Qp, Vs, Qs, Thick
     2.5  5500.0   200.0  3000.0   100.0     0.0 :DNS, Vp, Qp, Vs, Qs, Thick
  * FAULT DATA *
     100.0     100.0 : Total Length (STR) and Width (DIP) (m),
    1    1    1 : Num. of Sub-Faults (NSTR,NDIP),Gauss Points per Wavelength
       0.0    1 : Time Delay(sec), Source Type(=0:Ramp; =1:Smoothed; =2:exp)
       0.0       0.0     100.0 : Location of Hypocenter (X, Y and Z: m)
       0.0       0.0     100.0 : Location of Fault Origin (X, Y and Z: m)
       0.0      90.0 : Strike, and Dip (deg)
    3000.0 : Rupture Velocity (m/s)
       1     0.0 : Number of Time Windows and Time Interval (sec)
     0.2     0.2 : Half-Rise time 1 & 2 for 1st Time Window (sec)
 * dislocations (m) on sub-faults for 6 time windows
 1000.0
   * rake angles (degree) on sub-faults for 6 time windows
  0.0
 * WAVENUMBER INTEGRATION DATA FOR SIMPSON'S OR FILON'S FORMULAS *
       400 : Number of Integration Points from 0 to om/Ryleigh(min)
        50 : Number of Integration Points from om/Ryl(min) to om/c(final)
      10.0 : Factor for c(final): c(final)=Ryl(min)/Factor (Use 10, usually)
 * DATA FOR THE ASYMPTOTIC SOLUTIONS *
         1 : BE USED (=1), OR NOT USED (=0)
 * CHANGE OF SIGNS OF IMAGINARY PARTS OF FINAL RESULTS (FOR FFT) *
         1 : CHANGE SIGN (=1), NOT CHANGE SIGN (=0)
 * OBSERVATION POINT DATA *
         1 : NUMBER OF OP
    8054.6    5556.5   10000.0 : x,y,z




  * Data for Dt, Duration, and Period *
     0.1     128 : Delta Time (sec), and Number of Time (must be Power of 2)
     0.2     0.0 : Minimum Period (sec), and Imaginary Omega for Phinney
  * MEDIUM DATA *
         2           : NL (NUMBER OF LAYERS)     t/m3,m/s,   ,m/s,   ,   m
     2.2  3000.0   100.0  2000.0    50.0  5000.0 :DNS, Vp, Qp, Vs, Qs, Thick
     2.5  5500.0   200.0  3000.0   100.0     0.0 :DNS, Vp, Qp, Vs, Qs, Thick
  * FAULT DATA *
     100.0     100.0 : Total Length (STR) and Width (DIP) (m),
    1    1    1 : Num. of Sub-Faults (NSTR,NDIP),Gauss Points per Wavelength
       0.0    1 : Time Delay(sec), Source Type(=0:Ramp; =1:Smoothed; =2:exp)
       0.0       0.0   10000.0 : Location of Hypocenter (X, Y and Z: m)
       0.0       0.0   10000.0 : Location of Fault Origin (X, Y and Z: m)
       0.0      90.0 : Strike, and Dip (deg)
    3000.0 : Rupture Velocity (m/s)
       1     0.0 : Number of Time Windows and Time Interval (sec)  
     0.2     0.2 : Half-Rise time 1 & 2 for 1st Time Window (sec)
 * dislocations (m) on sub-faults for 6 time windows
 1000.0
   * rake angles (degree) on sub-faults for 6 time windows
  0.0
 * WAVENUMBER INTEGRATION DATA FOR SIMPSON'S OR FILON'S FORMULAS *
       400 : Number of Integration Points from 0 to om/Ryleigh(min)
        50 : Number of Integration Points from om/Ryl(min) to om/c(final)
      10.0 : Factor for c(final): c(final)=Ryl(min)/Factor (Use 10, usually)
 * DATA FOR THE ASYMPTOTIC SOLUTIONS *
         1 : BE USED (=1), OR NOT USED (=0)
 * CHANGE OF SIGNS OF IMAGINARY PARTS OF FINAL RESULTS (FOR FFT) *
         1 : CHANGE SIGN (=1), NOT CHANGE SIGN (=0) 
 * OBSERVATION POINT DATA *
         1 : NUMBER OF OP
    8054.6    5556.5      50.0 : x,y,z



  * Data for Dt, Duration, and Period *
     0.1     128 : Delta Time (sec), and Number of Time (must be Power of 2)
     0.2     0.0 : Minimum Period (sec), and Imaginary Omega for Phinney
  * MEDIUM DATA *
         2           : NL (NUMBER OF LAYERS)     t/m3,m/s,   ,m/s,   ,   m
     2.2  3000.0   100.0  2000.0    50.0  5000.0 :DNS, Vp, Qp, Vs, Qs, Thick
     2.5  5500.0   200.0  3000.0   100.0     0.0 :DNS, Vp, Qp, Vs, Qs, Thick
  * FAULT DATA *
     100.0     100.0 : Total Length (STR) and Width (DIP) (m),
    1    1    1 : Num. of Sub-Faults (NSTR,NDIP),Gauss Points per Wavelength
       0.0    1 : Time Delay(sec), Source Type(=0:Ramp; =1:Smoothed; =2:exp)
       0.0       0.0     100.0 : Location of Hypocenter (X, Y and Z: m)
       0.0       0.0     100.0 : Location of Fault Origin (X, Y and Z: m)
       0.0      90.0 : Strike, and Dip (deg)
    3000.0 : Rupture Velocity (m/s)
       1     0.0 : Number of Time Windows and Time Interval (sec)
     0.2     0.2 : Half-Rise time 1 & 2 for 1st Time Window (sec)
 * dislocations (m) on sub-faults for 6 time windows
 1000.0
   * rake angles (degree) on sub-faults for 6 time windows
  0.0
 * WAVENUMBER INTEGRATION DATA FOR SIMPSON'S OR FILON'S FORMULAS *
       400 : Number of Integration Points from 0 to om/Ryleigh(min)
        50 : Number of Integration Points from om/Ryl(min) to om/c(final)
      10.0 : Factor for c(final): c(final)=Ryl(min)/Factor (Use 10, usually)
 * DATA FOR THE ASYMPTOTIC SOLUTIONS *
         1 : BE USED (=1), OR NOT USED (=0)
 * CHANGE OF SIGNS OF IMAGINARY PARTS OF FINAL RESULTS (FOR FFT) *
         1 : CHANGE SIGN (=1), NOT CHANGE SIGN (=0)
 * OBSERVATION POINT DATA *
         1 : NUMBER OF OP
    8054.6    5556.5   10000.0 : x,y,z



  * Data for Dt, Duration, and Period *
     0.1     128 : Delta Time (sec), and Number of Time (must be Power of 2)
     0.2     0.0 : Minimum Period (sec), and Imaginary Omega for Phinney
  * MEDIUM DATA *
         2           : NL (NUMBER OF LAYERS)     t/m3,m/s,   ,m/s,   ,   m
     2.2  3000.0   100.0  2000.0    50.0  5000.0 :DNS, Vp, Qp, Vs, Qs, Thick
     2.5  5500.0   200.0  3000.0   100.0     0.0 :DNS, Vp, Qp, Vs, Qs, Thick
  * FAULT DATA *
     100.0     100.0 : Total Length (STR) and Width (DIP) (m),
    1    1    1 : Num. of Sub-Faults (NSTR,NDIP),Gauss Points per Wavelength
       0.0    1 : Time Delay(sec), Source Type(=0:Ramp; =1:Smoothed; =2:exp)
       0.0       0.0     100.0 : Location of Hypocenter (X, Y and Z: m)
       0.0       0.0     100.0 : Location of Fault Origin (X, Y and Z: m)
       0.0      90.0 : Strike, and Dip (deg)
    3000.0 : Rupture Velocity (m/s)
       1     0.0 : Number of Time Windows and Time Interval (sec)
     0.2     0.2 : Half-Rise time 1 & 2 for 1st Time Window (sec)
 * dislocations (m) on sub-faults for 6 time windows
 1000.0
   * rake angles (degree) on sub-faults for 6 time windows
  0.0
 * WAVENUMBER INTEGRATION DATA FOR SIMPSON'S OR FILON'S FORMULAS *
       400 : Number of Integration Points from 0 to om/Ryleigh(min)
        50 : Number of Integration Points from om/Ryl(min) to om/c(final)
      10.0 : Factor for c(final): c(final)=Ryl(min)/Factor (Use 10, usually)
 * DATA FOR THE ASYMPTOTIC SOLUTIONS *
         1 : BE USED (=1), OR NOT USED (=0)
 * CHANGE OF SIGNS OF IMAGINARY PARTS OF FINAL RESULTS (FOR FFT) *
         1 : CHANGE SIGN (=1), NOT CHANGE SIGN (=0)
 * OBSERVATION POINT DATA *
         1 : NUMBER OF OP
    8054.6    5556.5    3950.0 : x,y,z



  * Data for Dt, Duration, and Period *
     0.1     128 : Delta Time (sec), and Number of Time (must be Power of 2)
     0.2     0.0 : Minimum Period (sec), and Imaginary Omega for Phinney
  * MEDIUM DATA *
         2           : NL (NUMBER OF LAYERS)     t/m3,m/s,   ,m/s,   ,   m
     2.2  3000.0   100.0  2000.0    50.0  5000.0 :DNS, Vp, Qp, Vs, Qs, Thick
     2.5  5500.0   200.0  3000.0   100.0     0.0 :DNS, Vp, Qp, Vs, Qs, Thick
  * FAULT DATA *
     100.0     100.0 : Total Length (STR) and Width (DIP) (m),
    1    1    1 : Num. of Sub-Faults (NSTR,NDIP),Gauss Points per Wavelength
       0.0    1 : Time Delay(sec), Source Type(=0:Ramp; =1:Smoothed; =2:exp)
       0.0       0.0    4000.0 : Location of Hypocenter (X, Y and Z: m)
       0.0       0.0    4000.0 : Location of Fault Origin (X, Y and Z: m)
       0.0      90.0 : Strike, and Dip (deg)
    3000.0 : Rupture Velocity (m/s)
       1     0.0 : Number of Time Windows and Time Interval (sec)
     0.2     0.2 : Half-Rise time 1 & 2 for 1st Time Window (sec)
 * dislocations (m) on sub-faults for 6 time windows
 1000.0
   * rake angles (degree) on sub-faults for 6 time windows
  0.0
 * WAVENUMBER INTEGRATION DATA FOR SIMPSON'S OR FILON'S FORMULAS *
       400 : Number of Integration Points from 0 to om/Ryleigh(min)
        50 : Number of Integration Points from om/Ryl(min) to om/c(final)
      10.0 : Factor for c(final): c(final)=Ryl(min)/Factor (Use 10, usually)
 * DATA FOR THE ASYMPTOTIC SOLUTIONS *
         1 : BE USED (=1), OR NOT USED (=0)
 * CHANGE OF SIGNS OF IMAGINARY PARTS OF FINAL RESULTS (FOR FFT) *
         1 : CHANGE SIGN (=1), NOT CHANGE SIGN (=0)
 * OBSERVATION POINT DATA *
         1 : NUMBER OF OP
    8054.6    5556.5       0.0 : x,y,z

