  * Data for Dt, Duration, and Period *
    0.05     256 : Delta Time (sec), and Number of Time (must be Power of 2)
     0.2     0.1 : Minimum Period (sec), and Imaginary Omega for Phinney
  * MEDIUM DATA *
         2           : NL (NUMBER OF LAYERS)     t/m3,m/s,   ,m/s,   ,   m
    2.60  4000.0  1000.0  2000.0  1000.0  1000.0 :DNS, VP, Qp, Vs, Qs, Thick
    2.70  6000.0  1000.0  3464.0  1000.0     0.0 :DNS, VP, Qp, Vs, Qs, Thick
  * FAULT DATA *
    8000.0    4000.0 : Total Length (STR) and Width (DIP) (m),  
    8    4    6 : Num. of Sub-Faults (NSTR,NDIP),Gauss Points per Wavelength
       0.0    2 : Time Delay(sec), Source Type(=0:Ramp; =1:Smoothed; =2:exp)
       0.0    1000.0    4000.0 : Location of Hypocenter (X, Y and Z: m)
       0.0       0.0    6000.0 : Location of Fault Origin (X, Y and Z: m)
      90.0      90.0     180.0 : Strike, Dip (deg) and Rake (deg)
    3000.0 : Rupture Velocity (m/s)
       1     0.0 : Number of Time Windows and Time Interval (sec)  
    0.05    0.05 : Half-Rise time 1 & 2 for 1st Time Window (sec)
 * dislocations (m) on sub-faults for 6 time windows
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
 1.0
   * rake angles (degree) on sub-faults for 6 time windows
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 0.0
 * WAVENUMBER INTEGRATION DATA FOR SIMPSON'S OR FILON'S FORMULAS *
       100 : Number of Integration Points from 0 to om/Ryleigh(min)
        10 : Number of Integration Points from om/Ryl(min) to om/c(final)
      10.0 : Factor for c(final): c(final)=Ryl(min)/Factor (Use 10, usually)
 * DATA FOR THE ASYMPTOTIC SOLUTIONS *
         1 : BE USED (=1), OR NOT USED (=0)
 * CHANGE OF SIGNS OF IMAGINARY PARTS OF FINAL RESULTS (FOR FFT) *
         1 : CHANGE SIGN (=1), NOT CHANGE SIGN (=0) 
 * OBSERVATION POINT DATA *
         1 : NUMBER OF OP
    6000.0    8000.0       0.0 : x,y,z
