  * Data for Dt, Duration, and Period *
     0.5      16 : Delta Time (sec), and Number of Time (must be power of 2)
     1.0    0.00 : Min Period (sec), and Imag Omega for Phinney's Method
  * MEDIUM DATA (KBU1) *
         3 : NL (Num. of Layers)                  t/m3,m/s,   ,m/s,   ,  m
    2.00  2000.0   100.0  1000.0    50.0   500.0 :DNS, VP, Qp, Vs, Qs, Thick
    2.30  3000.0   140.0  2000.0    70.0   500.0 :DNS, VP, Qp, Vs, Qs, Thick
    2.40  4000.0   160.0  2500.0    80.0  1000.0 :DNS, VP, Qp, Vs, Qs, Thick
  * FAULT DATA *
       1.0       1.0 : Total Length (STR) and Width (DIP) (m),  
    1    1    1 : Num. of Sub-Faults (NSTR,NDIP),Gauss Points per Wavelength
       0.0    1 : Time Delay(sec), Source Type(=0:Ramp; =1:Smoothed; =2:exp)
       0.0       0.0   10000.0 : Location of Hypocenter (X, Y and Z: m)
       0.0       0.0   10000.0 : Location of Fault Origin (X, Y and Z: m)
     220.0      50.0 : Strike, Dip (deg) and Rake (deg)
    3000.0 : Rupture Velocity (m/s)
       1     0.0 : Number of Time Windows and Time Interval (sec)  
    0.20    0.20 : Half-Rise time 1 & 2 for 1st Time Window (sec)
 * dislocations (m) on sub-faults for 6 time windows
  10000.0
 * rake angles (degree) on sub-faults for 6 time windows
  10.0
 * WAVENUMBER INTEGRATION DATA FOR SIMPSON'S OR FILON'S FORMULAS *
       200 : Number of Integration Points from 0 to om/Ryleigh(min)
        50 : Number of Integration Points from om/Ryl(min) to om/c(final)
      10.0 : Factor for c(final): c(final)=Ryl(min)/Factor (Use 10, usually)
 * DATA FOR THE ASYMPTOTIC SOLUTIONS *
         1 : BE USED (=1), OR NOT USED (=0)
 * Data for FFT *
     1 : Output Displacemnt(=0), Velocity(=1), or Acceleration(=2)
 0 0 1 : Change of Sign for X, Y and Z Components (=0 No Change; =1 Change)
     0 : Trapezoidal Bandpass-Filter (=0 No Use; =1 Use)
   0.0   0.0  99.0 999.0 : Corners of the Filter (Lfr1<Lfr2<Hfr3<Hfr4: Hz)    
     0 : Smoothing Wave (=IFFT; Num of dt = Num of dt * 2**IFFT)
     1 : Change Unit (=0: m, m/s, or, m/s/s; =1: cm, cm/s, or gal)
 * OBSERVATION POINT DATA *
         1 : NUMBER OF OP: Repeat of (x,y,z) in row (unit: m)
  1000.0   0.0   0.0
  2000.0   0.0   0.0
  3000.0   0.0   0.0
  4000.0   0.0   0.0
  5000.0   0.0   0.0
